Considerations for Using Color Coat in Low Luster Clear

• Color Coat isn’t a dye so it shouldn’t be used for distinctly different color changes.
• Color Coat is fast drying but should not be subjected to heavy use or scraping for 24 hours after applying.
• Color Coat is prepped for spraying, right out of the can.
• Color Coat Flattener may be applied with all Color Coat intermix formulas.
• Vinyls with high amounts of plasticizers might need SEM Tac Free for a smooth finish.

Preparing Surfaces for Application of Color Coat in Low Luster Clear

• For plastic and vinyl, always use SEM Soap to clean the substrate using a grey scrubber.
• For carpet and velour, clean the surface by using an appropriate carpet or upholstery cleaner.
• Clean vinyl once more with Vinyl Prep or XXX Universal Surface Cleaner.
• Clean plastic again with Plastic & Leather Prep or XXX Universal Surface Cleaner.
• Clean carpet and velour again with Plastic and Leather Prep.
• To promote adhesion on PVC or ABS plastics, SEM offers Sand Free Adhesion Promoter. For TPO, EPDM, PP and other thermoplastics, use XXX Adhesion Promoter or Plastic Adhesion Promoter.
• Always follow the manufacturer’s directions for applying each of these products to ensure professional outcomes.

Important Facts About Color Coat in Low Luster Clear

• Color Coat isn’t a dye and shouldn’t be applied for significantly different color changes.
• Color Coat is quick drying but should not be subject to heavy use or for 24 hours after application.
• Color Coat is prepped for spraying, right out of the can.
• Color Coat Flattener may be used with any and all Color Coat intermix formulas.
• Vinyls with large amounts of plasticizers may require SEM Tac Free for a smooth surface.

How to Prep for Color Coat in Low Luster Clear

• For vinyl and plastic, always use SEM Soap to clean the substrate using a grey scrubber.
• For velour and carpet, clean the substrate by using an appropriate upholstery or carpet cleaner.
• Clean vinyl again with Vinyl Prep or XXX Universal Surface Cleaner.
• Clean plastic once more with XXX Universal Surface Cleaner or Plastic & Leather Prep.
• Clean carpet and velour once more with Plastic and Leather Prep.
• To guarantee adhesion on ABS or PVC plastics, SEM Sand Free Adhesion Promoter. For PP, EPDM, TPO and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Always follow the manufacturer’s directions for using each of these products to ensure the best results.

Use Color Coat™in Low Luster Clear when you need a flexible, fade-resistant, and durable coating to revitalize or change the color of carpet, velour, vinyl, and plastic. OEM recommended, Color Coat offers a number of colors and three different clear coats that may also be mixed to offer thousands of OEM color options in matched formulas. Color Coat in Low Luster Clear comes in four different types of cans: 8 oz, 16 oz or 1 pint cone top and one gallon. Color Coat’s outstanding quality lets you renew car interiors, and its durability even lets you apply Color Coat to motorcycle seats. Get flexibility for revitalizing faded or damaged vehicle exteriors or interiors by choosing Color Coat by SEM!

Important Facts About Color Coat in Low Luster Clear

• Even though Color Coat is a coating, as its name suggests, and not a dye, it is not recommended for drastic color changes.
• Color Coat dries quickly but shouldn’t be subjected to abrasion or heavy use until 24 hours after applying.
• There is no need for thinning Color Coat. It is made ready to apply.
• Vinyls can have excessive amounts of plasticizers. If so, for a smooth surface they need SEM Tac Free.
• Color Coat Flattener may be applied with any Color Coat intermix formulas to ensure a close match with the OEM color.

Prepping Surfaces for Use with Color Coat in Low Luster Clear

• To prep for applying Color Coat, you will require other SEM cleansers and adhesion promoters depending on the surface.
• For cleaning plastic and vinyl, apply SEM Soap and XXX Universal Surface Cleaner or Vinyl Prep.
• For cleaning velour and carpet, use an appropriate carpet or upholstery cleanser and SEM Plastic and Leather Prep.
• For plastics, first identify the kind of plastic. With PVC and ABS plastics use SEM Sand Free Adhesion promoter. For TPO, PP, EPDM and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Follow manufacturer’s instructions closely to ensure professional results.

Use Color Coat™in Low Luster when you need a mixable, UV resistant, and permanent coating to revitalize or change the color of plastic, carpet, vinyl, and velour. OEM recommended, Color Coat offers a variety of colors and three different clear coats that can also be mixed to provide 1000s of OEM color options in matched formulas. Color Coat in Low Luster is shipped in 4 different can types: one gallon, 1 quart cone top, 16 oz cone top, and 8 oz cone top. Color Coat’s outstanding quality lets you refinish auto interiors, and its durability even lets you apply Color Coat to motorcycle seats. Get flexibility for revitalizing damaged or faded vehicle interiors or exteriors by selecting Color Coat by SEM!

Considerations for Applying Color Coat in Low Luster

• Color Coat isn’t a dye, but it still shouldn’t be applied for distinctly different color changes.
• Color Coat is fast drying but shouldn’t be subject to heavy use or abrasion for 24 hours after applying.
• Color Coat is prepped to use right out of the can.
• Color Coat Flattener can be applied with all Color Coat intermix formulas.
• Vinyls with excessive amounts of plasticizers can require SEM Tac Free for a smooth finish.

Prepping Substrates for Use of Color Coat in Low Luster

• To prepare for using Color Coat, you will need additional SEM cleaners and adhesion promoters based on the substrate.
• For cleaning vinyl and plastic, use SEM Soap and Vinyl Prep or XXX Universal Surface Cleaner.
• For cleaning carpet and velour, use an appropriate upholstery or carpet cleanser and SEM Plastic and Leather Prep.
• For plastics, first determine the kind of plastic. With ABS or PVC plastics use SEM Sand Free Adhesion promoter. For PP, EPDM, TPO and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Follow manufacturer’s directions closely to ensure the best results.