Considerations for Using Color Coat in Landau Black

• Color Coat is a coating as its name suggests, and not a dye, so it is not recommended for drastic color changes.
• Color Coat dries quickly but should not be subjected to abrasion or heavy use until twenty-four hours after application.
• There is no need to thin Color Coat; it is made ready to spray.
• Vinyls can have large amounts of plasticizers. If your vinyl does, then we recommend SEM Tac Free for a smooth surface.
• Color Coat Flattener may be used with all Color Coat intermix formulas to ensure a closer match with the OEM color.

Prepping Surfaces for Use of Color Coat in Landau Black

• For vinyl and plastic, always use SEM Soap to clean the surface using a grey scruff pad.
• For velour and carpet, clean the substrate by using an appropriate upholstery or carpet cleaner.
• Clean vinyl again with Vinyl Prep or XXX Universal Surface Cleaner.
• Clean plastic again with XXX Universal Surface Cleaner or Plastic & Leather Prep.
• Clean carpet and velour again with Plastic and Leather Prep.
• To guarantee adhesion on ABS or PVC plastics, SEM provides Sand Free Adhesion Promoter. For PP, EPDM, TPO and other thermoplastics, use XXX Adhesion Promoter or Plastic Adhesion Promoter.
• Always follow the instructions for using each of these products to guarantee best outcomes.

Considerations for Using Color Coat in Silver Metallic

• Color Coat isn’t a dye so should not be used for significantly different color changes.
• Color Coat is quick drying but should not be subjected to heavy use or abrasion for 24 hours after applying.
• Color Coat is prepped to spray, right out of the can.
• Color Coat Flattener may be applied with any and all Color Coat intermix formulas.
• Vinyls with high amounts of plasticizers may need SEM Tac Free for a smooth finish.

Preparing Substrates for Application of Color Coat in Silver Metallic

• For vinyl and plastic, always use SEM Soap to clean the surface by using a grey scrubber.
• For carpet and velour, clean the surface by using an appropriate carpet or upholstery cleanser.
• Clean vinyl again with Vinyl Prep or XXX Universal Surface Cleaner.
• Clean plastic once more with Plastic & Leather Prep or XXX Universal Surface Cleaner.
• Clean carpet and velour again with Plastic and Leather Prep.
• To encourage adhesion on PVC and ABS plastics, SEM provides Sand Free Adhesion Promoter. For PP, EPDM, TPO and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Always follow the manufacturer’s instructions for applying each of these products to guarantee best results.

Important Facts About Color Coat in Light Buckskin

• Color Coat is a coating, as its name suggests, and not a dye, so it is not recommended for distinctly different color changes.
• Color Coat dries quickly but shouldn’t be subjected heavy use until 24 hours after applying.
• There is no necessity to thin Color Coat as it is made ready for spraying.
• Vinyls can have excessive amounts of plasticizers. If so, for a smooth finish they need SEM Tac Free.
• Color Coat Flattener may be used with all Color Coat intermix formulas to ensure a closer match with the original color.

Prepping Surfaces for Application with Color Coat in Light Buckskin

To prep for using Color Coat, you will require other SEM cleaning agents and adhesion promoters, depending on the substrate.

• For cleaning plastic and vinyl, apply SEM Soap and XXX Universal Surface Cleaner or Vinyl Prep.
• For cleaning carpet and velour, apply an appropriate carpet or upholstery cleanser and SEM Plastic and Leather Prep.
• For plastics, first determine the kind of plastic. With PVC and ABS plastics apply SEM Sand Free Adhesion promoter. For PP, TPO, EPDM and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Follow manufacturer’s directions exactly to ensure best outcomes.

Considerations for Applying Color Coat in Super White

• Color Coat is a coating as its name suggests, and not a dye, so it is not recommended for distinctly different color changes.
• Color Coat dries quickly but shouldn’t be subject to scraping or heavy use until 24 hours after application.
• There is no need for thinning Color Coat as it is made ready to spray.
• Vinyls can have high amounts of plasticizers. If your vinyl does, then we recommend SEM Tac Free for a smooth surface.
• Color Coat Flattener may be used with all Color Coat intermix formulas to guarantee a close match with the original color.

How to Prep for Color Coat in Super White

• For vinyl and plastic, always apply SEM Soap to clean the substrate by using a grey scrubber.
• For velour and carpet, clean the substrate using an appropriate carpet or upholstery cleaner.
• Clean vinyl once more with XXX Universal Surface Cleaner or Vinyl Prep.
• Clean plastic again with Plastic & Leather Prep or XXX Universal Surface Cleaner.
• Clean carpet and velour again with Plastic and Leather Prep.
• To guarantee adhesion on PVC and ABS plastics, SEM offers Sand Free Adhesion Promoter. For PP, TPO, EPDM and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Always follow the directions for applying each of these products to guarantee best results.

Important Facts About Color Coat in Fast Yellow

• Color Coat isn’t a dye and shouldn’t be applied for drastic color changes.
• Color Coat is quick drying but should not be subjected to heavy use or abrasion for twenty-four hours after applying.
• Color Coat is ready to spray, right out of the can.
• Color Coat Flattener may be used with all Color Coat intermix formulas.
• Vinyls with high amounts of plasticizers might require SEM Tac Free for a smooth finish.

How to Prep for Color Coat in Fast Yellow

• For plastic and vinyl, always use SEM Soap to clean the surface with a grey scrubber.
• For carpet and velour, clean the substrate with an appropriate upholstery or carpet cleanser.
• Clean vinyl again with Vinyl Prep or XXX Universal Surface Cleaner.
• Clean plastic again with Plastic & Leather Prep or XXX Universal Surface Cleaner.
• Clean velour and carpet once more with Plastic and Leather Prep.
• To guarantee adhesion on ABS or PVC plastics, SEM offers Sand Free Adhesion Promoter. For PP, TPO, EPDM and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Always follow the manufacturer’s instructions for applying each of these products to ensure best possible outcomes.

Considerations for Applying Color Coat in Red Oxide

• Color Coat isn’t a dye so shouldn’t be applied for drastic color changes.
• Color Coat is quick drying but should not be subjected to heavy use or abrasion for 24 hours after applying.
• Color Coat is prepped to spray, right out of the can.
• Color Coat Flattener can be applied with all Color Coat intermix formulas.
• Vinyls with high amounts of plasticizers can need SEM Tac Free for a smooth finish.

Preparing Surfaces for Use with Color Coat in Red Oxide

• For plastic and vinyl, always apply SEM Soap to clean the surface using a grey scruff pad.
• For carpet and velour, clean the substrate with an appropriate carpet or upholstery cleaner.
• Clean vinyl once more with Vinyl Prep or XXX Universal Surface Cleaner.
• Clean plastic once more with Plastic & Leather Prep or XXX Universal Surface Cleaner.
• Clean carpet and velour once more with Plastic and Leather Prep.
• To encourage adhesion on PVC and ABS plastics, SEM provides Sand Free Adhesion Promoter. For TPO, EPDM, PP and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Always follow the manufacturer’s instructions for using each of these products to guarantee quality results.

Important Facts About Color Coat in Fast Red

• Color Coat isn’t a dye and shouldn’t be applied for drastic color changes.
• Color Coat is quick drying but should not be subjected to heavy use or abrasion for twenty-four hours after applying.
• Color Coat is ready to spray, right out of the can.
• Color Coat Flattener may be used with all Color Coat intermix formulas.
• Vinyls with high amounts of plasticizers might require SEM Tac Free for a smooth finish.

How to Prep for Color Coat in Fast Red

• For plastic and vinyl, always use SEM Soap to clean the surface with a grey scrubber.
• For carpet and velour, clean the substrate with an appropriate upholstery or carpet cleanser.
• Clean vinyl again with Vinyl Prep or XXX Universal Surface Cleaner.
• Clean plastic again with Plastic & Leather Prep or XXX Universal Surface Cleaner.
• Clean velour and carpet once more with Plastic and Leather Prep.
• To guarantee adhesion on ABS or PVC plastics, SEM offers Sand Free Adhesion Promoter. For PP, TPO, EPDM and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Always follow the manufacturer’s instructions for applying each of these products to ensure the best possible outcomes.

Important Facts About Color Coat in Fast Blue

• Color Coat is not a dye and shouldn’t be used for significantly different color changes.
• Color Coat is fast drying but should not be subject to heavy use or abrasion for twenty-four hours after applying.
• Color Coat is ready for spraying, right out of the can.
• Color Coat Flattener can be applied with any Color Coat intermix formulas.
• Vinyls with high amounts of plasticizers may need SEM Tac Free for a smooth surface.

Prepping Surfaces for Application with Color Coat in Fast Blue

• For vinyl and plastic, always apply SEM Soap to clean the surface with a grey scrubber.
• For velour and carpet, clean the substrate by using an appropriate carpet or upholstery cleaner.
• Clean vinyl again with XXX Universal Surface Cleaner or Vinyl Prep.
• Clean plastic once more with XXX Universal Surface Cleaner or Plastic & Leather Prep.
• Clean velour and carpet again with Plastic and Leather Prep.
• To promote adhesion on ABS and PVC plastics, SEM provides Sand Free Adhesion Promoter. For PP, TPO, EPDM and other thermoplastics, use XXX Adhesion Promoter or Plastic Adhesion Promoter.
• Always follow the manufacturer’s instructions for applying each of these products to ensure the best outcomes.

Important Facts About Color Coat in Tinting White

• Color Coat is a coating as its name suggests, and not a dye, so it is not recommended for drastic color changes.
• Color Coat dries quickly, but should not be subjected to abrasion or heavy use until twenty-four hours after application.
• There is no need for thinning Color Coat; it is made prepped for spraying.
• Vinyls can have large amounts of plasticizers. If your vinyl does, then we recommend SEM Tac Free for a smooth surface.
• Color Coat Flattener can be used with all Color Coat intermix formulas to guarantee a closer match with the original color.

Preparing Surfaces for Use of Color Coat in Tinting White

• For vinyl and plastic, always use SEM Soap to clean the substrate using a grey scruff pad.
• For carpet and velour, clean the substrate by using an appropriate upholstery or carpet cleaner.
• Clean vinyl once more with XXX Universal Surface Cleaner or Vinyl Prep.
• Clean plastic once more with XXX Universal Surface Cleaner or Plastic & Leather Prep.
• Clean velour and carpet again with Plastic and Leather Prep.
• To guarantee adhesion on PVC or ABS plastics, SEM offers Sand Free Adhesion Promoter. For TPO, PP, EPDM and other thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter.
• Always follow the instructions for applying each of these products to guarantee professional results.

Considerations for Applying Color Coat in Fast Green

• Even though Color Coat is a coating, as its name suggests, and not a dye, it is not recommended for significantly different color changes.
• Color Coat dries quickly but should not be subjected to scraping or heavy use until 24 hours after applying.
• There is no need for thinning Color Coat as it is made prepped to spray.
• Vinyls can have large amounts of plasticizers. If so, for a smooth finish they need SEM Tac Free.
• Color Coat Flattener can be used with all Color Coat intermix formulas to guarantee a closer match with the OEM color.

Prepping Surfaces for Use of Color Coat in Fast Green

• To prep for applying Color Coat, you will need additional SEM cleaners and adhesion promoters, based on the substrate.
• For cleaning plastic and vinyl, apply SEM Soap and XXX Universal Surface Cleaner or Vinyl Prep.
• For cleaning carpet and velour, use an appropriate upholstery or carpet cleanser and SEM Plastic and Leather Prep.
• For plastics, first identify the kind of plastic. With ABS or PVC plastics use SEM Sand Free Adhesion promoter. For TPO, PP, EPDM and other thermoplastics, apply XXX Adhesion Promoter or Plastic Adhesion Promoter.
• Follow manufacturer’s instructions closely to guarantee professional outcomes.